Pressed stainless steel outer casing incorporating flush fitted vitroceramic top and touch control panel.
One 180mm and one 160mm diameter with automatic selection and manual override for single or double coil use.
Glass touch control panel having separate or twin coil selector control, manual power setting (+/-).
Hob designed to operate with either 1x large single pan (up to 34cm diameter) or 2x small pans (up to 16cm diameter per pan)
Induction will work with pans and ceramics having a ferritic base, such as cast iron, enamelled iron and specific induction pans. Induction can also be used with cast iron searing / griddle plates for grilling meats, fish, and vegetables.
440mm wide x 580mm deep x 160mm high (Usable surface 340mm wide x 405mm). Maximum Pan size 320mm diameter
410mm wide x 550mm deep and clear depth of 280mm must be left below the unit. The unit should not be installed above means of heat (hot cupboard / oven / etc.). If installed within a closed void adequate ventilation is required. For additional detail please consult installation manual.
3.0kW (12.2amp load) - Unit fitted as standard with three core 1.5m cable and 13amp three pin plug rated at 13 amp.
Unit shipped in box suitable for transportation 495mm wide x 625mm deep x 140mm high. Unit has a net weight of 10.5kgs
Complies with EN60335-2-36 (European Standard for safety of electrical appliances. IP259 (Protection rating) NFU60-010 (Hygiene)